ground bus การใช้
- Aren't some neutral wires actually attached to the ground buss in the panel ? ( Not in Canada)
- The station also has an above-ground Bus Plaza for rail passengers to transfer to / from their bus routes.
- The center row of contacts are all connected to the common ground bus and attached to the odd numbered conductors of the cable.
- The hazard was eliminated from later sets by the use of an internal ground bus connected to the chassis by an isolation network.
- To reduce the possibility of CSST lightning damage : 1 ) Yellow-jacketed CSST should be bonded ( connected to the electrical service panel s ground bus ) at its entrance into a building.
- Note the connections to the common ground bus from sockets 2 ( top left ), 19 ( center bottom row ), 22, 24, 26, 30, and 40 on all connectors.
- Also note ( enlarged detail, bottom, looking from the opposite side of the connector ) that socket 34 of the blue connector does not contact any conductor but unlike socket 34 of the other two connectors, it does connect to the common ground bus.
- The lack of more integrated bus facilities has been the subject of criticism, particularly due to the fact that the original design for the transport centre included an underground bus station, which was cut from the final design due to costs and the bus operators'preference for above-ground bus facilities.